1. 負責連接器相關領域常見的失效分析：變色，開裂，燒毀，接觸電阻變大，異物，可焊性，壓接，氧化腐蝕等；Responsible for common failure cases analysis of connector: Discoloration, Crack, Burnt, LLCR too big, Contamination, solderability, Crimping, Oxide, etc.

2. 負責連接器領域競爭對手樣品分析：材料，鍍層，工藝，壓接，尺寸，設計，等；Responsible for connector competitive sample analysis: Material, Plating, Craft, Crimping, Size, Design, etc.

3. 深入分析典型失效案例，通過材質，工藝，應用，失效模擬等找到根源，避免重復性的失效質量事故；Deeply failure analysis for typical cases by material, craft, application and FA simulation. Find root cause and avoid repeated quality issue.

4. 總結分析的基礎上，形成論文；Based on failure analysis and submit Paper.

5. 從測試，失效分析，應用等領域提出革新建儀；Submit Innovation ideas based on ****ing, failure analysis and application.

6. 失效實驗室日常的運營維護：樣品管理，質量體系，5S，EHS，LEAN; Daily FA Lab running: Sample management, Lab quality system, 5S, EHS, LEAN.

7. 其它指定的相關工作;Other assigned work.



Position requirement:

1. 碩士及以上學歷，材料，理化，可靠性及失效分析相關專業，5年以上工作經驗。Master or above degree, major in Material, Physics & Chemistry, Reliability or Failure analysis, working experience no less than 5 years.

2. 熟悉高分子材料分析方法，能操作常用的分析儀器：SEM/EDX, FTIR, DSC， TGA， FIB，熔融指數，理化，光學顯微鏡，等；Familiar Polymer material analysis method, operation main analysis instruments: SEM/EDX, FTIR, DSC， TGA， FIB，melt index, Physics & Chemistry, Optical microscope;

3. 熟悉金屬材料分析方法，能操作常用的分析儀器: SEM/EDX，硬度計，切片，金相，等；Familiar Metal material analysis method, operation main analysis instruments: SEM/EDX, Hardness, Cross section, metallographic, etc.

4. 熟悉綜合的失效分析在連接器上的應用：電氣，機械，環境，加速壽命老化，可靠性，等;Familiar other comprehensive failure analysis method on connector: Electrical, Mechanical, Environment, Lifetime, Reliability;

5. 熟悉工業無損探傷（3D CT）測試及分析；Familiar Industry CT nondestructive **** and analysis;

6. 熟悉切片分析（Cross section ****）測試及分析；Familiar cross section **** and analysis;

7. 有實驗室工作經驗，熟悉CNAS17025質量體系；Have Lab working experience, familiar CNAS 17025 quality system;

8. 流利的英語讀寫及表達；Fluently English ability: Reading, Writing, Expression.

職位類別： 制造工程師/工藝工程師/工藝員

舉報